Tear down of a Canon HF R50

More for the assemble (updated 20180301)

Pan Tilt Feedback Control for a Bescor MP101 Video Motorized Pan Head

Tilt Feedback Control




So this first test works! Get a range of about 100 analog readings for the 30 degrees of tilt.

Hot glued the potentiometer directly to the head

On to Pan Control - what kind of analog potentiometers have multiple rotations - I want to stick with analog as I don't want to count pulses or worry about location on startup - hey these cheap 10-turn rotating ones might do it! Hope the gear size for 1:10 can be worked out.





I did a few quick test prints to workout the smallest gear teeth that would printout correctly.

Love first print designs that are 95% working!

This 1:10 ratio is going to work great for pan control!

More Analog Please
Lets try to get more range out of our analog potentiometer



This gear was a pain to design. I tried to work out how much gear was needed.

The top bracket ended up being too flexible and the gears don't stay connected - fail!





Inside gear and smaller B103 wheel potentiometer





Seeing full range of analog values with this 1:10 setup - but this small 10,000 Ω B103 is a fail!

Hot melt glue got inside the wheel while gluing on the gear - there's a small hole in the wheel and hot glue flows nicely into it as you press the gear on.

  potentiometer + hot glue = wheel doesn't turn

Tried a second time using tape to cover the small hole - it's still a fail!

Also See the not so nice tilt on the gear - these small pot's are easily damaged... This one turned into a 5,000 Ω.

Inside Gear it Is




A few issues with tilting:
 - arms a bit too long
 - arms a little bendy
 - alignment of top and bottom bracket












Control Center - found these cute joysticks for control - nice wiring...



And it's Done!

- The servo on top is for zoom control. - The potentiometer holder still gets directly glued to head unit arm. - If the glue doesn't hold - I've included holes to screw the holder directly into the arm. - Advantage of using the holder with the flipped potentiometer is that the gears are closer to the unit (keeping the gears aligned) and helps keep all the mess centered. - Fixed: length and bendiest of tilt arms; added guide for alignment of top and bottom tilt bracket.
PAN - Needed to add a cutout for the power feed into the camera. - A wider camera would likely need a bit of a redesign with the top tilt bracket, add a spacer between to raise up the cam and change out the mounting screw or another option would be to print a drop-in replacement for the top plate. The existing plate is held in place with four screws. TILT - Once I thickened up the 10-Turn potentiometer base, had issues with screwing it into the base. - The potentiometer uses a M8-0.75 thread. - Not having that tap, completely destroyed one potentiometer trying to force it into the PLA holder. - Now I heat up the PLA holder and busted up potentiometer threads and tap. - The base still has enough flex to account for any misalignment's with the gears.
- Used existing screws from the unit. - These screws are long enough to hold the new printed part and existing bottom plate in place. - The pan gear slips/presses onto the fixed pan/mount base.

Up NEXT
- Field testing
- Code Control
- Upgrades

References:

3d Parts and Design for above:
  Tilt Pan Position Feedback for Bescor MP101 Video Motorized Pan Head
  http://www.thingiverse.com/thing:2241863

my zoom control:
  http://pantonvich.blogspot.com/2016/07/canon-vixia-hf-r50r600-cam-recorder.html

parts:
  Bescor MP101 Video Motorized Pan Head
  http://smile.amazon.com/Bescor-MP101-Video-Motorized-Head/dp/B008T17W9O

  WXD3-13 10K Ohm 2W 4 mm Shaft Diameter 10-Turn Wire Wound Potentiometer
  https://smile.amazon.com/gp/product/B01CDXMC34

  Adafruit Panel Mount 10K potentiometer (Breadboard Friendly) (10K Linear) [ID:562]
  https://www.adafruit.com/product/562

  Dual-axis XY Joystick Module For Arduino Joystick Module
  https://smile.amazon.com/gp/product/B01D83B2G6

these parts didn't work out:
  B103 10K Ohm 5-Pin Dual Linear Dial Wheel Potentiometer
  https://www.amazon.com/gp/product/B013FPKCMM

additional:
  Cut your own gears with profile shift - OpenSCAD library
  http://www.thingiverse.com/thing:636119

  Bescor MP-101 Hack Part 1
  http://protechy.com/bescor-mp-101-hack-part-1/

  Bescor MP-101 and Arduino v3.0
  http://protechy.com/bescor-mp-101-and-arduino-v3-0/

  Hardware @ Lab
  http://hardware.ideaslab.mk/

  PJON - Arduino compatible Communications Bus System
  https://github.com/gioblu/PJON

Livestream a Bike Race at the Dick Lane Velodrome

The 2 hour Otto Robot with Nieces

http://www.instructables.com/id/Otto-Build-You-Own-Robot-in-Two-Hours/

Aluminum Whisky Ice BAll Mold/Melter

Whisky drinking with fancy ice here we come!

Using a $7 ebay woodworking router bit and two chucks of 4" round bar aluminum.

1/2" Shank 2" Dia Woodworking Round Nose Cove Core Box Router Bit Cutter Tool

Just need to figure out the right ice chunk sizes to use and a stand to hold the press together.

update: 2018/1/2

Printed a sleeve to hold the alum molds together.

Now I just need to figure out clear ice and some good starter ice tray molds to use before the pressing and drinking.

Halloween 2016 - Baby Dolls

To the thrift store for two slightly used dolls - can't beat 40 and 80 cents.

So sorry little gal but you need Red LED eyes!!



I never used servo's before - but found 5 sets of these cheep 28BYJ-48 Stepper Motor's for $12.68

I searched Thingiverse for a pulley created with openSCAD that had the stepper connection and quickly modified it as I don't need the V-groove (thing:913582). I screwed it directly to the gals head.

Looking good!

Next wire management - as I want the head to speed without twisting the wires. Searches on the webs came up empty with slip-rings that would fit my needs so - I designed my own thing:1824060 ;-)

I had issues getting power through the bearing so I popped off the dust cap and cleaned with wd-40 to flush out the grease.

   

Works great - well until the gal's stuffing gets wound out inside the bearing because it's missing the dust cap!

Next up is sound with this $9.99 MP3 Player with the help of this wiki, git code and free Poltergeist MP3 we are good to go.